江苏楼梯间压力传感器供应商来电咨询「豪鲁邦空调」

前室压力传感器

The whole pure of the residual pressure monitoring system is to keep the residual pressure in the standard range of the stairwell and the front room, to prevent the harmful ***oke from entering, to ensure the normal opening of the fire door, and to ensure the unblocked life passage. Also known as residual pressure measurement and control system, pressure difference measurement and control system, or intelligent residual pressure monitoring system, is a high-rise buildings in the itive pressure air supply system to adjust the fire chamber or stairwell residual pressure value of a set of systematic devices.

武城县豪鲁邦是德州紫旭空调旗下的兄弟单位，是一家做电梯案前室压力传感器的厂家Fire Wind Pressure Sensor, Elevator Front Room Wind Pressure Sensor, Elevator Front Room Wind pressure sensor, PTC201-K1 pressure difference/pressure sensor/pressure sensor, itive pressure supply air pressure sensor, itive pressure supply air outlet pressure sensor, lift Chamber Pressure Sensor, Stair Chamber Pressure Sensor, lift chamber outlet pressure sensor, building itive pressure supply pressure sensor, by-pass Valve pressure relief sensor, itive pressure supply system pressure sensor, with display itive pressure air supply outlet pressure sensor, high-rise buildings, office buildings, shopping malls, shared front room pressure sensor, control roof fan pressure sensor, itive pressure supply pressure controller,

前室压力传感器

质量可靠相当于传感与控制器一个新方向的采合.性价同等产品优越.

4:表面有精细巡检指示灯与报.当工作时巡检指示灯绿灯亮起,当感应到风压过***红灯亮起并有无源开关动作.

主要应用在消防正压送风感测压差高要求控制泄压阀,余压阀动作.高精度要求压差控制为目的工业系统中运用. 此产品也称之为正压送风传感器,压差测控器,风压差传感器等!

测量范围: 0～100pa

耐    压：1000PA

Product Features are: 1: The use of sensing technology, core components imported core body. 2: And Directly Change The sensor signal into changeable passive switch signal with microprocessor circuit.